Flange Fixes Made Easy: A Contractor’s Guide to Toilet Repairs
As a contractor, you know that a faulty toilet flange can lead to major headaches for homeowners—leaky ceilings, soft flooring, and a rocking toilet are just the start. Whether you’re on a service call or tackling a bathroom remodel, properly repairing or replacing a toilet flange is essential to preventing water damage and ensuring a secure installation.
Understanding the Role of the Toilet Flange
A toilet flange (also called a closet flange) connects the toilet to the drainage system and secures it to the floor. Flanges are available in various materials, including PVC, ABS, cast iron, brass, and stainless steel, depending on the waste pipe type and installation requirements. When a flange breaks or deteriorates, the toilet loses stability, potentially breaking the wax seal and allowing water to seep into the subfloor. Addressing flange issues promptly can save homeowners from costly repairs down the line.
Step 1: Shut Off Water Supply and Remove the Toilet
Before beginning, turn off the toilet’s water supply and drain the remaining water by holding down the flush handle. Use a sponge or water-absorbing gel to remove any residual water in the bowl and tank. Protect the surrounding floor with a drop cloth before loosening the toilet bolts with an adjustable wrench. If the toilet is caulked to the floor, carefully score the caulk line with a utility knife before lifting the toilet and setting it aside.
Step 2: Remove the Old Wax Seal and Inspect the Flange
Scrape off the old wax ring from the flange, toilet base, and floor using a putty knife. Inspect the flange for cracks, rust, or deterioration. If only the ring is damaged, a replacement repair ring may suffice. If the entire flange is compromised, a full replacement is necessary.
Step 3: Choosing the Right Repair or Replacement Solution
● For Minor Flange Damage: A repair ring can be installed over the existing flange using screws and a bead of 100% silicone sealant to reinforce the connection.
● For Severely Damaged Flanges: Remove the existing flange and replace it with a new one that matches the waste pipe material. PVC and ABS replacement flanges typically secure with solvent cement, while cast iron replacements may require compression gaskets or specialty tools.
● Flange Height Considerations: Ensure the flange sits on top of the finished floor for a proper wax seal. If it’s too low, use an extended-height flange, or spacers mounted on the existing flange to bring it flush with the floor. You can solvent weld PVC spacers or use 100% silicone sealant for a watertight seal between layers.
Step 4: Installing the New Flange or Repairing the Existing One
